My Cart

Close

FREE SHIPPING IN SA FOR ALL ORDERS OVER R500

Blackbeard

Maple Tele Neck

R950.00

GN-TEL-SH-20


This Tele neck is inlaid, fretted & finished. The nut is shaped as well as slotted.

Comes ready with a beautiful maple fretboard with inlays as well as side markers.

The base of the neck is blank i.e there are no screw holes in order to attach the neck to the body. If the neck is needed for a Bolt-On guitar, the holes will need to be drilled.

Installed is a single action truss rod with 4mm adjusting nut at the headstock.

Can choose either a pre-shaped or non-shaped headstock which has been drilled to fit 6 in-line tuning machines. The holes have a 10mm diameter to fit sealed gear tuners with threaded peg head bushings.

The neck should always fit into the pocket of the guitar body with minimal effort. Never force the neck in. In order to ensure a smooth fitting, the part of neck that sits in the neck pocket of the body should be free of paint or lacquer. When finishing the guitar or neck, remember to use masking tape on the neck pocket as well as the base of the neck which fits into the body.

Specification:

Neck: Maple
Fingerboard: Maple
Inlay: Black Dot
Headstock: Shaped
Fret Count: 22
Width at Nut: 4.2cm
Width at Last Fret: 5.6cm
Heel Thickness: 2.7cm
Heel Width: 5.6cm

Blackbeard's Newsletter

Signup to receive only good stuff